This manual describes how to use your POINT I/OTM 1734-232ASC serial interface module (for the RS-232 network) or 1734-485ASC and 1734-485ASCK modules (for the RS-485 or RS-422 network) in Logix 5000® control systems. You can use POINT I/O modules directly with CompactLogixTM 5370 controllers.

POINT I/O RS-232 and RS-485 ASCII Modules Installation Instructions ATTENTION: Read this document and the documents listed in the Additional Resources section about installation, configuration and operation of this equipment before you install, configure, operate or maintain

1734-in588_-en-p Installation Instructions 1734-IN588 1734-um009_-en-p User Manual 1734-UM009 Type Resource Publication; ... POINT I/O RS-232 ASCII Interface. Close. 1734-232ASC. Close Print Chevron Left. Chevron Right.

Quickly access technical documents for Allen-Bradley Bulletin 1734 POINT I/O and communication modules and POINT Guard I/O modules.

After wiring, configure the 1734-232ASC Module using RSNetWorx for DeviceNet. If RSNetWorx cannot determine what device the ASCII module is, an EDS file may have to be loaded using the EDS Wizard in RSNetWorx. The EDS file can be downloaded at www.ab.com/networks/eds.

View and Download Allen-Bradley POINT I/O 1734-232ASC user manual online. RS-232 ASCII Module. POINT I/O 1734-232ASC control unit pdf manual download.

The Allen-Bradley 1734-232ASC is a POINT I/O communication interface module that functions as an ASCII communication module. It is typically used to interface barcode readers in the Point of Sale (POS) or within the manufacturing line to implement automated sorting and quality assurance systems.

The 1734-232ASC module connects to the RS-232 network while the 1734-485ASC module connects to the RS-485 or RS-422 network.

Interface Module, for RS232 Communication Connections, ASCII, 24 Volt DC, Cat #: 1734-232ASC, Mfr: Allen-Bradley

This manual describes how to install, configure, and troubleshoot your POINT I/O 1734-232ASC module (for the RS-232 network) or 1734-485ASC module (for the RS-485 or RS-422 network). You must be able to use RSNetWorx for DeviceNet …