Apr 12, 2021 · Access the cooling coil portion of the FCU by removing the access panel. Check the coil for possible dirt. Clean if found dirty. Inspect and check the 3-way valve and thermostat for proper functioning. Replace if any component is defective. Switch ON the fan coil unit. Fill-up the necessary checklists for records purposes. FCU Annual ...

In order to service your FCU you must be able to access the metal filter and the condensate drain. By identifying and locating these parts you can then focus on removing the tiles that give you access to them, and may only need to remove two or three tiles to gain sufficient access.

Aug 16, 2023 · Fan coil unit maintenance inspections should be completed at the following intervals – Weekly | Monthly | 6 Months | 1 Year and 4 Years, here we detail what should be inspected and documented…

The bedroom FCU(s) are accessible through drop-down ceiling access panels in the master bedroom and/or hallway. NB: You will need a 'key' or flat-headed screwdriver to unlock the access panels. Be careful as you lower them - they are very heavy as they have a fire-resistant lining.

We’ll need to reassemble the access panel of the FCU. Lastly, we turn on the FCU at the thermostat to check that it’s working properly. Recall that VAV boxes are terminal devices, and are installed at the openings of ducts. These regulate the quantity of air entering a room. Let’s look into how to clean a VAV box.

rear access panel (270 Model). Removal of the coil/rear access panel will allow the filter to drop out. • Carefully remove the filter from the ceiling void for cleaning.

You do not need to provide and access hatch that allows for the replacement of the AC compressor or FCU. 3.2 Plan the location and size of access panels by coordinating the Mechanical Services Drawings with the Subcontractor’s Shop Drawings and Architectural Reflected Ceiling Plans to provide access to all required Services.

FMA4X, FMA4P Fan Coils are designed with application flexibility in mind and are suitable for closet and flush mount installations. Units are available with field-installed electric heat with circuit breaker. Units are used indoors as the fan coil for split-system heat pumps or air conditioners.

Access. Fan Coil Units (FCU) in ceilings must: Have a minimum access panel of 450mm x 450 mm; Be installed to allow for adequate access unhindered for: Routine maintenance; Removal of filters; Access to valves, motors, control box.

Make sure that all access panels and blanking plates are in position and are secured. Ensure that all electrical wirings comply with the project specification & requirements. All electrical components, where applicable are provided with all necessary safety, …