May 2, 2024 · I used to have a Hub 3 and was getting very poor WiFi distribution throughout the house. Had an Engineer visit and he recommended a Mesh System to bounce the Wifi signal …

Hub5, Gig1 & Tenda Nova MW6 Having been using a Hub 3 for the past 3 years on 50mb, I've just upgraded to 1Gig and Hub 5 which should be coming Friday. I live in a 2 bedroom flat, I've …

2 - Connect the Tenda with a Cat 6 cable to the Hub. 3 - Make sure the Tenda is in DHCP mode and leave it switched on. 4 - Switch on the Hub 3 and wait for everything to initialise. The …

Apr 7, 2024 · Your Tenda MW6 for starters 😎 Assuming the Hub is in modem mode then the first Tenda unit - connected on ethernet cable to the Hub - is doing the routing duties. Only need a …

Had a Hub 3 using with a Tenda MW6. Hub went down and after spending best part of Sunday, VM swapped out on Monday with a Hub 5. Could not fault the speed of arranging the engineer …

Feb 4, 2024 · reset a Tenda to defaults make sure its set to be a router and DHCP change to modem mode wait 5mins see if you get internet if not power off the hub for 2mins and turn …

Hi. Just a quick question. Trying to set up a TP mesh system and it’s asking for what type of connection I have.

For tonight, I've put the Tenda kit into AP mode, and letting the TP-Link wired router run the network. It's working, but its disappointing the Tenda and Virgin kit won't talk to each other. …

Just got the hub 5. I wanted to use it in router mode as per my old hub 3. But it looks like the option to choose your own IP range has been removed!

With 5 static IPs, Modem Mode is the ONLY thing you can use. The 4 ethernet ports are configured as a switch and your BASE/29 subnet range is delivered to your router as a …