UL-969 recognized tape In general, the tamper-evident, most of the extra-strength adhesive and flexible ID tapes are recognized by Underwriters Laboratories, which are listed under the UL file number PGJI2.MH21016.

This peak enables the machine to print the first page quicker. Sometimes this warm-up peaking at 9.2 amps will cause lights to flicker as the power is drawn. You may experience similar light flickering if you plugged in a hair dryer or similar appliance into the same electrical outlet. The machine has been approved by Underwriters Laboratory (UL).

Secure documents are documents that are password protected when they are sent to the machine. Only the people who know the password will be able to print them.

The Pattern collections are purchased separately. If you are having trouble viewing the activated pattern collection, try using another operating system.

Follow the steps below if this is the first time you are using My Design Center. My Design Center will be activated once the scanning frame has been attached.

5. Pass the machine bed through the bed through the ring of the cap frame driver. Be careful that the cap frame driver does not hit any nearby parts, such as the presser foot.

- Make sure it has an Underwriters Laboratories (UL) rating. Specifically, it should meet the UL1449 Safety Standard for Transient Voltage Surge Suppressors. - Make sure its label says Transient Voltage Surge Suppressor or TVSS. - If your machine continues to randomly power on and off, it will require service.

Current specifications are printed on rating plates of all Brother Products. Each product is designed and CSA/UL approved as such. Although the use of transforms to alter power supplies may be used, a minimum of 2.0Amp (or as indicated …