Sep 16, 2021 · A range test demonstrates the real-world RF range and link quality between two XBee modules in the same network. Performing a range test will give an initial indication of the expected communication performance of the kit components.

With an XBee Explorer connected between your computer and your XBee, and with the help of the X-CTU software, you can easily configure XBees, test connections, and pass data between your computer and remote XBees. We're going to show you how to do all of that in this tutorial!

The Digi XCTU Throughput Tool lets you directly measure the communications rate between any two Digi XBee multi-point or mesh network modules. Simply connect one radio module to Digi XCTU, then test your bandwidth to any other Digi XBee radio on the same network.

Jul 10, 2019 · This post talks about how to use Digi XCTU to test your wireless communication range. How to Range Test Digi XBee Nodes with Digi XCTU. In wireless communications, predicting the quality of long-distance links before installing an IoT system can be critical.

May 6, 2013 · The modules worked well in the same room, but I wanted to test the range of the modules to ensure it would work at the distances I needed. The first thing I did was connect both Xbees to an Arduino. On one end, the Xbee is connected to a combination SD card and Xbee shield on top of an Arduino Uno.

Digi XBee® Studio is the definitive tool to manage and configure Digi XBee cellular devices. The application includes embedded tools that make it easy to set up, configure, communicate with and test Digi XBee 3 Cellular modems.

Aug 23, 2019 · Digi’s XCTU application provides the automated and graphical tools needed for full loopback range testing of your entire system including the antennas and cabling. Once on-site, local environmental factors can be included in your predictions. Want to know if your Digi XBees will go the distance? Digi XCTU gives you peace of mind.

This Quick Start Guide provides step-by-step instruction on how to setup wireless links and test the modules’ ability to transport data over varying ranges and conditions. This guide illustrates how to setup and run a point-to-point range test; then how …

Sep 13, 2015 · If you are trying to test if the XBees are working, leave the motor and anything else out, for now. You haven't given much information on your setup, which makes it hard to give you specific help, so here's what I suggest.

Connect XBEE_B to a power supply (or laptop or portable battery) and move it away from XBEE_A to the desired location for your range test. The following table provides the approximate indoor and outdoor ranges.

May 8, 2019 · We’ll cover how to set up wireless XBee communication between a computer, an Arduino/XBee Shield Combo, and an XBee Explorer. Note that this particular tutorial uses the XBee Series 1 module. We’ll also introduce you to XCTU and explain how to configure XBee networks and addresses.

Jul 31, 2019 · The Digi XCTU Throughput Tool lets you directly measure the communications rate between any two Digi XBee multi-point or mesh network modules. Simply connect one radio module to Digi XCTU, then test your bandwidth to any other Digi …

Jan 24, 2025 · Q: In the XBee3 series, are there any documents that describe test data related to noise such as EMI and EMS? Please let me know whether or not there is any published documentation on the noise performance of the XBee3.

Feb 14, 2019 · In this tutorial we will interface XBee module with Arduino Uno board. The XBee connected with Arduino board will act as a receiver and it will communicate wirelessly with other XBee module which is serially connected with the laptop using a Explorer Board.

Feb 26, 2010 · I have 2 XBees each mounted in Sparkfun Explorer board, i have a Coordinator and a Router, both running ZB. I run the Range Test on X-CTU then, I click on Start and get “Timeout waiting for data” so then i open X-CTU for the other XBee and also click on Start.

Jul 17, 2019 · Digi XCTU provides a complete set of tools for configuring and testing Digi XBee device networks. Use the range test tool to test the wireless communication range of the nodes on your XBee network prior to deployment.

Mar 25, 2024 · For the longer communication range, I use tg.22.0111 (1.91 Dbi) and Oscar 3a (11 dbi yagi) antenna. By the theory and matlab simulation, those rf parts should make over 6 km wireless connection. But there are sudden disconnection at 200 m distance. What I mean “sudden“ is tg connection stops at 200 m without received power reduction.

Feb 7, 2016 · The range test works by sending a 32 byte packet out of a given com port and expects that data to be sent back within a given time frame. That is generally done by shorting the Tx and Rx lines together on the remote radio via a Loop back adapter or jumper.

Sep 26, 2024 · The test modes of the XBee Cellular radios can be executed with commands sent directly to the cellular chipset on the radio using USB direct communication. Contact Digi Technical Support for the instructions in using these commands.

Aug 5, 2013 · This project demonstrates how to interface an Xbee module with the Arduino board and perform a full transmission and reception test between two Xbee modules generally known as loop back test. Any AVR microcontroller based board which follows the standard Arduino schematic and is flashed with the Arduino bootloader can be called an Arduino board.