Aug 12, 2012 · Gearbox Lubrication 1. For gearbox, use a high quality gear oil with a viscosity index of 80W or 90W and an API service rating of GL-4 or -5 in gearboxes. 2. Fill gearbox until oil runs out the side plug on gearbox. Check gearbox daily for evidence of leakage, and contact your dealer if leakage occurs. Driveline Lubrication 1.

May 4, 2009 · Want to change the gear oil in the gearbox on my Woods BrushBull BB72X. There is a vent that screws into the top flat cover plate on the gearbox through which one fills the gearbox until the oil leaks out the side plug port. My question is what do you do to drain the gearbox to get the old greenish colored very stinky gear oil out?

Oct 6, 2006 · The manual says, "The gearbox has been filled with lubricant to the proper level. . .The gearbox should not require additional lubricant unless the box is cracked or a seal is leaking." It tells how to check the level and add more oil if needed but not how to empty or change the oil. The gearboxes have a dipstick plug and a "test" plug on top.

Aug 12, 2018 · Approximately 2011 85w140 gear oil was introduced as the recommended gear oil for all Rhino gearboxes. Today Rhino factory fills all gearboxes with Lucas Oil 85W140. Top off oil for the Lucas Oil or the original “000” can be any GL5 85W140 oil. Reference Part: 00786250 I hope that helps.

Jul 7, 2023 · I'm going to be changing the Mower deck gearbox oil on my Kubota ZD1211 with RCK60P (side discharge) mower deck. 180 hrs so I'm a little late, manual states change at 150 hrs. Manual states to use "Gasoline Engine Oil SH or Higher, SAE 10W30"

Mar 10, 2009 · Have just bought a used Kubota flail mower and will service it before using for the first time. The recommended gearbox oil is SAE 90 oil. I'm a big fan of synthetic oil and have Mobil 1 75W-90 gear oil around for other uses, and I'm …

Mar 6, 2006 · Also.. I prefer 85/140 wt oil in the gearbox.. though I'm sure 80w synthetic.. or 90w is FINE and won't hurt a thing. As was mentioned.. some people add a 0# grease or mix grease and a little gear oin in a leaky box. ( Some boxes actually spec a 0# grease... ) The infor ont he fill and level plug was good.

May 16, 2004 · Water is heavier than oil and will go to the lowest point, which is the bottom bearing. Even if there was a drain plug in the case, you would only be diluting the water with a drain and refill. For what its worth, the gear oil in my MX5 has looked like margarine (light yellow in color - almost white) since I bought the machine new three years ago.

Mar 27, 2006 · Gear oil you can pick up at W*M or any auto parts store. The manufacturer may have a specific recommendation, but I use 80W90. Jun 19, 2006 / What type of oil for finish mower gearbox?

Sep 8, 2012 · if the te20 is liek the 9n, the trans, hyds, and rear end are common sump, and probably originally specced a 90w mineral gear oil.. which wil be similar to a 90w gl1 or gl3 oil today.. though an 80w90 gl4/5 that carries the mt1 rating and states that it is yellow metal safe would be fine too.